Titanium Welded Equal Tee
Material: Titanium
Grade: Gr1, Gr2, Gr5, Gr9, Gr7, Gr12
Standard: ASME B16.9
NPS: 5"-46", DN100-DN1200, 114-1200mm
Materials Standard: ASTM B265, ASTM B363
Type：Titanium Equal Tee
Processing: Welded Tee, 1pc welding seam
Welding Method: TIG, GTAW
Surface Treatment: Pickling, Polished
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Titanium Products Description
The Titanium Welded Equal Tee is a titanium alloy equal-diameter welded tee conforming to ASME B16.9 standards, used for three-way equal-diameter branching and merging in corrosive or high-reliability piping systems.
Parameter information
Material: Titanium
Grade: Gr2 / UNS RR50250, Gr7 / UNS R52400, Gr12 / UNS R53400
Standard: ASME B16.9
NPS: 5"-46", DN100-DN1200, 114-1200mm
Materials Standard: ASTM B265, ASTM B363
Type: Titanium Equal Tee
Processing: Welded Tee, 1pc welding seam
Welding Method: TIG, GTAW
Surface Treatment: Piclking surface tee, Polished surface tee
Products advanatges
Stable Corrosion Resistance: Utilizing Gr2/Gr7/Gr12 titanium, it forms a stable passivation film in seawater, chlorine-containing media, and most chemical media, exhibiting a low corrosion rate suitable for long-term operation.
TIG Welding: Employing TIG (GTAW) full penetration welding, weld zone contamination is controlled, and weld performance closely resembles that of the base material, meeting the requirements for pressure-bearing pipe fittings.
Wide Size Range: Covering NPS 5″–46″ / DN100–DN1200, conforming to ASME B16.9 dimensional tolerances, facilitating system docking.
Selectable Surface Finishes: Available in pickled or polished finishes to meet the needs of conventional industrial or high-cleanliness applications.
Physical Properties / Chemical Composition
Chemical Compositions of titanium gr2, gr7, gr12 tee
|
Grade |
Fe Max |
O Max |
N Max |
C Max |
H Max |
Pd Max |
Ni Max |
Mo Max |
|
|
/ |
Wt % |
Wt % |
Wt % |
Wt % |
Wt % |
Wt % |
Wt % |
Wt % |
|
|
Gr2 |
0.3 |
0.25 |
0.03 |
0.08 |
0.015 |
||||
|
Gr7 |
0.3 |
0.25 |
0.03 |
0.08 |
0.015 |
0.12- 0.25 |
|||
|
Gr12 |
0.3 |
0.25 |
0.03 |
0.08 |
0.015 |
0.6-0.9 |
0.2-0.4 |
||
|
Ti |
Balance |
||||||||
Physical Properties of UNS R50400, UNS R52400, UNS R53400 tee
|
Grade |
Tensile strength MPA-Min |
Yield strength MPA-Min |
Elongation %-Min |
|
Gr2 UNS R50400 |
345 |
275 |
20 |
|
Gr7 UNS R52400 |
400 |
275 |
18 |
|
Gr12 UNS R53400 |
483 |
348 |
18 |
Titanium Welded Equal Tee Dimension
Products Picture Show
Spectral detection Of Titanium Welded Tee
Polished Surface Titanium Equal Tee
shipping and Packing
Packing: Standard Export Wooden Case
Delivery: FOB, DDU, EXW, CIF, DDP, DAP, DAT, FCA
fAQ
Q: Is this an equal diameter tee?
A: Yes, the nominal diameters in all three directions are consistent, meeting the equal diameter design requirements.
Q: Can it be used long-term in corrosive media?
A: Yes, titanium exhibits stable corrosion resistance in most oxidizing and chloride-containing media.
Q: Will the weld affect the strength?
A: No, it uses TIG full penetration welding, and the weld performance is close to that of the base material.
Q: Which standards are followed?
A: Structural dimensions conform to ASME B16.9, and materials conform to ASTM B265/B363.
Q: How is it protected during transportation?
A: Individual packaging to prevent impact damage and contamination.
Q: Do you have ISO9001 approval?
A: -Yes, we are an Iso9001-2015 approval manufacture
Q: Do you process customized titanium grade welded tee?
A: -Yes, customized titanium grade acceptable, but we have a MOQ
Q: Do you process large OD titanium seamless equal tee?
A: -Yes, the big OD seamless tee need wait longer time and more expensive than welded tee.
Hot Tags: titanium welded equal tee, China titanium welded equal tee manufacturers, suppliers, factory, short sleeve tee, Nickel Welded 90 Degree Elbow, titanium stub end, Nickel Welded Equal Tee, Titanium Stub End Short Pattern, nickel tee
