Nickel Welded Reducer Tee

 

 

Material: Nickel

Grade: N02200, N02201

OD: DN15-DN1050; 1/2"-42"; 21.34-1066mm;

Type: equal tee, reducer tee

Type1: seamless tee, welded Tee

Thickness: Sch5s, Sch10s, Sch40s, STD, Sch40, Sch60, Sch80s, Sch80

Surface Treatment: Pickling, Polished, Sandblasting

Elbow Standard: ASME B16.9, EN-1092,

Accept customized shape Nickel Tee according detail drawing

 

Nickel welded reducer tee is a pipe fitting with three openings,
Nickel Tee is used at the branch of the main pipeline to change the direction of the fluid, the tee can be used in various occasions where three identical or different pipelines need to be brought together.

Types of nickel tee including: T-shaped and Y-shaped, equal tee and reducer tee

Nickel Tee has excellent corrosion resistance, low density, high strength, smooth surface and no dirt, so nickel tee is widely used in various industrial fields.

The application of nickel tee need to consider many factors, such as pipe diameter size, working pressure, medium characteristics and so on.

 

 

 

 

 

 

 

 

 

 

 

 

 

The processing of nickel equal tee: hydraulic bulging and hot pressing which to ensure that the tee has good sealing and structural strength.

The nickel tee manufacturing process is a complex process, such as material selection, processing method determination and heat treatment.

 

First, material preparation.
we select nickel tube as raw materials according to the specifications and performance requirements of nickel tee.
The selection of nickel tube need consider many factors such as : chemical composition, mechanical properties and corrosion resistance.

At the same time, we also need doing some pretreatment of the nickel tube, such as cleaning and rust removal, to make sure the cleanliness and finish of the nickel tube surface.

 

The next is the processing and forming process.
we use methods such as hydraulic bulging or hot extrusion

Hydraulic bulging is to fill the nickel tube with liquid and then use hydraulic pressure to expand the nickel tube into the desired shape.

This method is suitable for making smaller size and simple shape nickel tee

The hot extrusion method is to extrude the nickel tube under high temperature conditions to deform it into the desired shape.

This method is suitable for making large-diameter, thick-walled nickel tee, or special shape nickel tee.

During the processing and forming process, we need to control parameters such as processing temperature and pressure to ensure the quality and performance of the nickel tee.

At the same time, we also need to clean and trim burrs, flash and other defects to ensure the good appearance of the nickel tee.

 

Finally, it is the follow-up processing.
Surface treatment, by spraying, polishing and other methods to improve the appearance of the nickel tee.
Marking , its specifications, models and other information can be marked on the nickel reducer tee.
Quality inspection is a comprehensive inspection of the nickel welded reducer tee, including dimension, appearance, performance and other aspects.

 

 

 

Hot Tags: nickel welded reducer tee, China nickel welded reducer tee manufacturers, suppliers, factory, Nickel Seamless Eccentric Reducer, Titanium Cap, Nickel Welded Concentric Reducer, nickel pipe, nickel reducer, Nickel Welded Reducer Tee